Reverser/es: Difference between revisions

Revision as of 16:47, 12 March 2025

El inversor es un dispositivo de control, generalmente una palanca, que se utiliza para establecer la dirección de movimiento de un vehículo ferroviario motorizado: adelante, atrás o neutro. Este último generalmente separa las ruedas del tren motriz por completo. El inversor nunca se debe operar cuando un vehículo esté en movimiento, para evitar daños graves al tren motriz. Por la misma razón, el controlador de tracción y los frenos dinámicos generalmente deben desconectarse para que el inversor funcione.

Vehicles equipped with a reverser can run both forward and backward with equal capacity, and are even equipped with lights on both ends for this purpose. Depending on the vehicle design, the only difference when changing orientation can be in driving visibility, and cooling behavior .

Reversers should never be operated when vehicles are in motion, to avoid catastrophic damage to the powertrain . For the same reason, to operate the reverser, throttle and dynamic brakes need to be disengaged.

On steam engines , cutoff is the closest feature to a reverser, albeit with more functionality.

@@ Line 1: / Line 1: @@
 <languages />
+<div class="mw-translate-fuzzy">
 El inversor es un dispositivo de control, generalmente una palanca, que se utiliza para establecer la dirección de movimiento de un vehículo ferroviario motorizado: adelante, atrás o neutro. Este último generalmente separa las ruedas del tren motriz por completo. El inversor nunca se debe operar cuando un vehículo esté en movimiento, para evitar daños graves al tren motriz. Por la misma razón, el controlador de tracción y los frenos dinámicos generalmente deben desconectarse para que el inversor funcione.
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
+Vehicles equipped with a reverser can run both forward and backward with equal capacity, and are even equipped with {{pll|Headlights & Cab Lights|lights}} on both ends for this purpose. Depending on the vehicle design, the only difference when changing orientation can be in driving visibility, and {{pll|Powertrain Overheating|cooling behavior}}.
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
+Reversers should never be operated when vehicles are in motion, to avoid {{pll|Mechanical Powertrain Damage|catastrophic damage to the powertrain}}. For the same reason, to operate the reverser, {{pll|Throttle|throttle}} and {{pll|Dynamic Brake|dynamic brakes}} need to be disengaged.
+</div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-On steam engines, the equivalent of the reverser is called cutoff. It is a bit more complex in that it determines the steam intake duration per cylinder cycle.
+On {{pll|Steam Overview|steam engines}}, {{pll|Cutoff|cutoff}} is the closest feature to a reverser, albeit with more functionality.
 </div>
-{{See also|Throttle|Dynamic Brake|Cutoff|Steam Drivetrain|Traction Motors|Hydraulic Transmission|Mechanical Transmission}}
+[[Category:Powertrains|3]]
-[[Category:Powertrains|2]]