Monitoring/zh-hans: Difference between revisions

Latest revision as of 17:51, 17 March 2025

制动系统可以通过通常位于机动车辆驾驶室中的制动仪表进行监控。主储液罐应始终保持较高压力，最高可达 8 巴，并由压缩机自动补充。制动管工作压力介于制动器完全施加时的 3.5 巴和完全释放时的 5 巴之间（由于仪表显示的压力是相对于大气压的，实际绝对压力比仪表上指示的压力高约 1 巴）。制动缸压力介于 0 和 3.75 巴之间，代表施加到车轮的实际制动力。由于制动压力表有时由多个指针共用，因此制动缸压力通常由制动管压力表上的红色指针表示。

Main reservoir pressure should always be at, or near, 8 bar, and it is automatically refilled by the compressor .

Brake pipe operating pressures are between 3.5 bar when the brake is fully applied and 5 bar when it is fully released. Brake pipe pressure is usually represented by a black or white needle on the brake pipe gauge, and its pressure is controlled by the train brake control device.

Brake cylinder pressure goes between 0 and 3.75 bar and represents the actual braking force applied to the wheels . Brake cylinder pressure is usually represented by a red needle on the brake pipe gauge.

Since gauges display pressures relative to the atmospheric pressure, the actual absolute pressures are approximately 1 bar higher than what's indicated on the gauge and used in technical documentation.

For better brake cylinder reading visibility, there is a Brake Cylinder LED Bar gadget , which can be bought in one of the shops .

@@ Line 5: / Line 5: @@
 <div lang="en" dir="ltr" class="mw-content-ltr">
-Reading of the {{pll|Air Brake System Overview|main reservoir}} should always be near 8 bar, as it is automatically refilled by the {{pll|Compressor|compressor}}.
+{{pll|Air Brake System Overview|Main reservoir}} pressure should always be at, or near, 8 bar, and it is automatically refilled by the {{pll|Compressor|compressor}}.
 </div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-{{pll|Air Brake System Overview|Brake pipe}} operating pressures are between 3.5 bar when the brake is fully applied and 5 bar when it is fully released. Brake pipe pressure is usually represented by a black or white needle on the brake pipe gauge.
+{{pll|Air Brake System Overview|Brake pipe}} operating pressures are between 3.5 bar when the brake is fully applied and 5 bar when it is fully released. Brake pipe pressure is usually represented by a black or white needle on the brake pipe gauge, and its pressure is controlled by the {{pll|Train Brake|train brake}} control device.
 </div>
@@ Line 21: / Line 21: @@
 <div lang="en" dir="ltr" class="mw-content-ltr">
-To help improve visibility of brake cylinder reading, there is a gadget called Brake Cylinder LED Bar, which can be bought in one of the {pll|Shops|shops}}.
+For better brake cylinder reading visibility, there is a Brake Cylinder LED Bar {{pll|Gadget Installation|gadget}}, which can be bought in one of the {{pll|Shops|shops}}.
 </div>
 [[Category:Air Brake System|6]]