Уровень воды

When running steam engines , it is of utmost importance to maintain a nominal water level in the boiler . This is done by observing a water gauge and adjusting the water level accordingly with available controls. The water level should always be visible in the water gauge, typically ranging between 75% and 85% of the boiler height.

If water rises above the limit, there are two potential dangers - there is less room for steam to be generated in, and water can overflow into the cylinders , potentially causing them to break .

If water falls under the limit, the boiler can explode and cause catastrophic damage . If the firebox is sufficiently hot and its top surface, known as crown sheet, protrudes above the water level, it can soften from high temperatures and pressure, and lead to the boiler explosion, destroying the entire vehicle.

In an emergency attempt to save the engine from exploding, immediately feed water and dump coal from the firebox.

To feed water to the boiler from storage , there's an injector . To dump water from the boiler there's a blowdown valve. Both controls are usually found in a vehicle's cab .

Уровень воды также зависит от уклона пути. При движении локомотива в под гору, уровень воды будет казаться ниже, чем при движении по горизонтальной поверхности, и наоборот. В случае крайней необходимости, для предотвращения взрыва котла можно сбросить пар при помощи крана сброса, сифона или даже продувательного крана цилиндров.

Water level is also grade dependent, and subject to sloshing. If the vehicle is going downhill, the level will appear lower than on a flat surface, and vice versa.