Water Level/it: Difference between revisions

Latest revision as of 00:56, 18 March 2025

When running steam engines , it is of utmost importance to maintain a nominal water level in the boiler . This is done by observing a water gauge and adjusting the water level accordingly with available controls. The water level should always be visible in the water gauge, typically ranging between 75% and 85% of the boiler height.

If water rises above the limit, there are two potential dangers - there is less room for steam to be generated in, and water can overflow into the cylinders , potentially causing them to break .

If water falls under the limit, the boiler can explode and cause catastrophic damage . If the firebox is sufficiently hot and its top surface, known as crown sheet, protrudes above the water level, it can soften from high temperatures and pressure, and lead to the boiler explosion, destroying the entire vehicle.

In an emergency attempt to save the engine from exploding, immediately feed water and dump coal from the firebox.

To feed water to the boiler from storage , there's an injector . To dump water from the boiler there's a blowdown valve. Both controls are usually found in a vehicle's cab .

Il livello dell'acqua è influenzato anche dall'espansione termica. Man mano che la temperatura aumenta, il suo livello aumenterà allo stesso modo, anche se non viene aggiunta nuova acqua alla caldaia.

Il livello dell'acqua dipende dalla pendenza del terreno ed è solito ondeggiare. Procedendo in discesa, il livello dell'acqua appare più basso di quello effettivo, osservabile in piano, e viceversa.

@@ Line 1: / Line 1: @@
 <languages />
 <div lang="en" dir="ltr" class="mw-content-ltr">
-When running {{pll|Steam Overview|steam engines}}, the most critical responsibility is to maintain a nominal level of water in the {{pll|Boiler|boiler}}. This is done by observing a water gauge and adjusting the water level accordingly. The water level should always be visible within the water gauge, typically ranging between 75% and 85% of the boiler height.
+When running {{pll|Steam Overview|steam engines}}, it is of utmost importance to maintain a nominal water level in the {{pll|Boiler|boiler}}. This is done by observing a water gauge and adjusting the water level accordingly with available controls. The water level should always be visible in the water gauge, typically ranging between 75% and 85% of the boiler height.
 </div>
@@ Line 9: / Line 9: @@
 <div lang="en" dir="ltr" class="mw-content-ltr">
-If water falls under the limit, the boiler can {{pll|Damage Overview|explode and cause catastrophic damage}}. If the {{pll|Firebox|firebox}} is sufficiently hot and its top surface, known as “crown sheet”, protrudes above the water level, it can soften from high temperatures and pressure, and lead to the boiler explosion.
+If water falls under the limit, the boiler can {{pll|Damage Overview|explode and cause catastrophic damage}}. If the {{pll|Firebox|firebox}} is sufficiently hot and its top surface, known as crown sheet, protrudes above the water level, it can soften from high temperatures and pressure, and lead to the boiler explosion, destroying the entire vehicle.
 </div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-In an emergency attempt to save the engine from explosion, immediately feed water and dump coal from the firebox.
+In an emergency attempt to save the engine from exploding, immediately feed water and dump coal from the firebox.
 </div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-Water is fed to the boiler from {{pll|Water Storage|storage}} using an {{pll|Injector|injector}}. It is dumped from the boiler using a blowdown valve, usually found in a vehicle's {{pll|Rail Vehicle Types|cab}}.
+To feed water to the boiler from {{pll|Water Storage|storage}}, there's an {{pll|Injector|injector}}. To dump water from the boiler there's a blowdown valve. Both controls are usually found in a vehicle's {{pll|Rail Vehicle Types|cab}}.
 </div>