Jump to content

Water Level/sv: Difference between revisions

From Derail Valley
FuzzyBot (talk | contribs)
Updating to match new version of source page
Tunis78 (talk | contribs)
Created page with "När man använder {{pll|Steam Overview|ånglok}}, är det av yttersta vikt att upprätthålla en nominell vattennivå i {{pll|Boiler|pannan}}. Detta görs genom att observera en vattenmätare och justera vattennivån därefter med tillgängliga reglage. Vattennivån ska alltid vara synlig i vattenmätaren, vanligtvis mellan 75 % och 85 % av pannans höjd."
Line 1: Line 1:
<languages />
<languages />
<div lang="en" dir="ltr" class="mw-content-ltr">
När man använder {{pll|Steam Overview|ånglok}}, är det av yttersta vikt att upprätthålla en nominell vattennivå i {{pll|Boiler|pannan}}. Detta görs genom att observera en vattenmätare och justera vattennivån därefter med tillgängliga reglage. Vattennivån ska alltid vara synlig i vattenmätaren, vanligtvis mellan 75 % och 85 % av pannans höjd.
When running {{pll|Steam Overview|steam engines}}, it is of utmost importance to maintain a nominal water level in the {{pll|Boiler|boiler}}. This is done by observing a water gauge and adjusting the water level accordingly with available controls. The water level should always be visible in the water gauge, typically ranging between 75% and 85% of the boiler height.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 07:05, 8 May 2025

När man använder ånglok , är det av yttersta vikt att upprätthålla en nominell vattennivå i pannan . Detta görs genom att observera en vattenmätare och justera vattennivån därefter med tillgängliga reglage. Vattennivån ska alltid vara synlig i vattenmätaren, vanligtvis mellan 75 % och 85 % av pannans höjd.

If water rises above the limit, there are two potential dangers - there is less room for steam to be generated in, and water can overflow into the cylinders , potentially causing them to break .

If water falls under the limit, the boiler can explode and cause catastrophic damage . If the firebox is sufficiently hot and its top surface, known as crown sheet, protrudes above the water level, it can soften from high temperatures and pressure, and lead to the boiler explosion, destroying the entire vehicle.

In an emergency attempt to save the engine from exploding, immediately feed water and dump coal from the firebox.

To feed water to the boiler from storage , there's an injector . To dump water from the boiler there's a blowdown valve. Both controls are usually found in a vehicle's cab .

Vattennivån påverkas också av termisk expansion. När vattentemperaturen stiger kommer även dess nivå att stiga, även om inget nytt vatten tillförs pannan.

Vattennivån är också lutnings beroende. Om ett lok går nedför kommer nivån att verka lägre än på en plan yta, och vice versa.