Independent Brake/en: Difference between revisions

Revision as of 20:15, 17 March 2025

Most locomotives and railcars come equipped with independent brakes. Similarly to train brakes , independent ones use mechanical brake shoes controlled by compressed air . However, they only serve a particular vehicle and not the entire train. Since their working volume is smaller than that of a train brake, pressure equalization is faster, so independent brakes are more practical to use when the vehicle is running solo.

Unlike train brakes, independent brakes bypass the brake pipe and work with pressure in the opposite manner. They receive pressurized air from the main reservoir directly when applied, and dump pressure into the atmosphere when released. Both train and independent brakes use the same brake cylinder , so the dominant one is the type that is applied more.

Motorized vehicles connected in a multiple-unit configuration will all apply their independent brakes, if any one of them does.

@@ Line 1: / Line 1: @@
 <languages />
-Most {{pll|Rail Vehicle Types|locomotives and railcars}} come equipped with independent brakes. Similarly to {{pll|Train Brake|train brakes}}, independent ones are controlled by {{pll|Air Brake System Overview|compressed air}}. However, they only serve a particular vehicle and not the entire train. Since their working volume is smaller than that of a train brake, pressure equalization is faster, so independent brakes are practical to use when the vehicle is running solo.
+Most {{pll|Rail Vehicle Types|locomotives and railcars}} come equipped with independent brakes. Similarly to {{pll|Train Brake|train brakes}}, independent ones use mechanical {{pll|Brake Shoes|brake shoes}} controlled by {{pll|Air Brake System Overview|compressed air}}. However, they only serve a particular vehicle and not the entire train. Since their working volume is smaller than that of a train brake, pressure equalization is faster, so independent brakes are more practical to use when the vehicle is running solo.
 Unlike train brakes, independent brakes bypass the {{pll|Air Brake System Overview|brake pipe}} and work with pressure in the opposite manner. They receive pressurized air from the {{pll|Air Brake System Overview|main reservoir}} directly when applied, and dump pressure into the atmosphere when released. Both train and independent brakes use the same {{pll|Air Brake System Overview|brake cylinder}}, so the dominant one is the type that is applied more.