Cylinder Cocks/zh-hans: Difference between revisions

Revision as of 12:30, 12 March 2025

Cylinders are steam engine components that house pistons that propel the vehicle. There's one cylinder on each side of the vehicle. They are alternately fed steam from the steam chest , with every full rotation of the driving wheels, in the amount set with the cutoff .

Steam in cylinders pushes the pistons inside, mechanically linked to the driving wheels, propelling the vehicle. The used steam is then expelled through the blastpipe, where it mixes with smoke from the firebox in the smokebox, and together they are exhausted into the atmosphere through a chimney.

当蒸汽不再进入气缸时，它们会迅速冷却下来。这是因为它们与锅炉和燃烧室分开。汽缸中的蒸汽很快又凝结成水。由于水不可压缩，不像蒸汽，如果足够多的水聚集在汽缸中并被活塞推动，它会破坏汽缸并导致灾难性的动力系统故障。

To prevent this, steam engines come equipped with cylinder cocks. They are operated by a lever from inside the cab , and allow water to be expelled from the cylinders. However, since steam escapes through the cocks too, they should only remain open for a short time, typically just a few seconds, when the vehicle begins moving from a standstill.

Cylinders can also fill with water if the boiler is overfilled , or from running the vehicle with the cutoff set in the opposite direction.

@@ Line 1: / Line 1: @@
 <languages />
+<div lang="en" dir="ltr" class="mw-content-ltr">
+Cylinders are {{pll|Steam Overview|steam engine}} components that house pistons that propel the vehicle. There's one cylinder on each side of the vehicle. They are alternately fed steam from the {{pll|Regulator|steam chest}}, with every full rotation of the driving wheels, in the amount set with the {{pll|Cutoff|cutoff}}.
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
+Steam in cylinders pushes the pistons inside, mechanically linked to the driving wheels, propelling the vehicle. The used steam is then expelled through the blastpipe, where it mixes with smoke from the {{pll|Firebox|firebox}} in the smokebox, and together they are exhausted into the atmosphere through a chimney.
+</div>
+<div class="mw-translate-fuzzy">
 当蒸汽不再进入气缸时，它们会迅速冷却下来。这是因为它们与锅炉和燃烧室分开。汽缸中的蒸汽很快又凝结成水。由于水不可压缩，不像蒸汽，如果足够多的水聚集在汽缸中并被活塞推动，它会破坏汽缸并导致灾难性的动力系统故障。
+</div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-For this reason there are cylinder cocks. They are operated by a valve from inside the cab, allowing water to be released from the cylinders. As some of the steam from the cylinder is lost while the cylinder cocks are open, acceleration is reduced. Typically, the drivers open cylinder cocks for a few seconds after being stationary for some time.
+To prevent this, steam engines come equipped with cylinder cocks. They are operated by a lever from inside the {{pll|Rail Vehicle Types|cab}}, and allow water to be expelled from the cylinders. However, since steam escapes through the cocks too, they should only remain open for a short time, typically just a few seconds, when the vehicle begins moving from a standstill.
 </div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
-Cylinders can also fill with water in a process called priming. This is the case of the boiler having too much water, or running the vehicle with the cutoff set in the opposite direction, causing water to overflow into the cylinders.
+Cylinders can also fill with water if the {{pll|Water Level|boiler is overfilled}}, or from running the vehicle with the {{pll|Cutoff|cutoff}} set in the opposite direction.
 </div>
-{{See also|Mechanical Powertrain Damage|Water Level|Cutoff}}
 [[Category:Steam Drivetrain|3]]