Gadget Installation/zh-hant: Difference between revisions
Created page with "Once the mount is in place and secured, a gadget can be attached to it. Gadgets and mounts can be removed using the {{pll|Hammer|鐵鎚}}. Drilled holes can be repaired too, using the {{pll|Filler Gun|填補槍}}。" |
No edit summary |
||
| Line 7: | Line 7: | ||
部分裝置需要{{pll|Mounts|固定座}}才能安裝，且尺寸必須與裝置本身大致符合。固定座必須以{{pll|Electric Hand Drill|電鑽}}或{{pll|Duct Tape|膠帶}}將固定座固定至一處平面。 | 部分裝置需要{{pll|Mounts|固定座}}才能安裝，且尺寸必須與裝置本身大致符合。固定座必須以{{pll|Electric Hand Drill|電鑽}}或{{pll|Duct Tape|膠帶}}將固定座固定至一處平面。 | ||
固定座在固定之後，裝置就能被置於其上。已安裝的裝置、固定座能以{{pll|Hammer|鐵鎚}}敲下。而電鑽留下的孔洞則能以{{pll|Filler Gun|填補槍}}修復。 | |||
<div lang="en" dir="ltr" class="mw-content-ltr"> | <div lang="en" dir="ltr" class="mw-content-ltr"> | ||
Revision as of 17:25, 21 April 2025
裝置是能自商店購買，可安裝於車輛上的物品，用於增強其功能並更簡便地使用，或 進行裝飾。
進行安裝時通常需要使用多樣物品，因此建議備有物品容器，或待在工具小屋、商店附近。
部分裝置需要固定座才能安裝，且尺寸必須與裝置本身大致符合。固定座必須以電鑽或膠帶將固定座固定至一處平面。
固定座在固定之後，裝置就能被置於其上。已安裝的裝置、固定座能以鐵鎚敲下。而電鑽留下的孔洞則能以填補槍修復。
In order to function, some gadgets need to be connected to the vehicle’s electrical supply. This is done using the soldering gun loaded with soldering wire. Bear in mind that soldering wires are expendable, so and each connection costs money.
Some gadgets can be wired together, using the crimping tool. For example, pairing gadgets with controllers, such as buttons and knobs, makes it possible to toggle them on and off, or fine tune their intensity.
To help differentiate certain gadgets, there is a label maker.
Gadgets installed on DVRT vehicles will, upon vehicle’s despawning, return to a tool shed.