Jump to content

Gadget Installation/ja: Difference between revisions

From Derail Valley
Tefny (talk | contribs)
Created page with "ガジェットの設置には通常、多数のアイテムの使用が必要になるため、{{pll|Item Containers|アイテム保管箱}}、{{pll|Tool Shed|道具小屋}}、さらには{{pll|Shops|ショップ}}の近くで作業することをお勧めします。"
Tefny (talk | contribs)
Created page with "一部のガジェットの設置には{{pll|Mounts|取付台}}が必要です。取付台のサイズはガジェットのサイズとほぼ一致している必要があります。取付台はあらゆる表面に設置できますが、{{pll|Electric Hand Drill|電気ドリル}}で穴を開けてねじ固定するか、{{pll|Duct Tape|ダクトテープ}}で固定する必要があります。"
Line 4: Line 4:
ガジェットの設置には通常、多数のアイテムの使用が必要になるため、{{pll|Item Containers|アイテム保管箱}}、{{pll|Tool Shed|道具小屋}}、さらには{{pll|Shops|ショップ}}の近くで作業することをお勧めします。
ガジェットの設置には通常、多数のアイテムの使用が必要になるため、{{pll|Item Containers|アイテム保管箱}}、{{pll|Tool Shed|道具小屋}}、さらには{{pll|Shops|ショップ}}の近くで作業することをお勧めします。


<div lang="en" dir="ltr" class="mw-content-ltr">
一部のガジェットの設置には{{pll|Mounts|取付台}}が必要です。取付台のサイズはガジェットのサイズとほぼ一致している必要があります。取付台はあらゆる表面に設置できますが、{{pll|Electric Hand Drill|電気ドリル}}で穴を開けてねじ固定するか、{{pll|Duct Tape|ダクトテープ}}で固定する必要があります。
Some gadgets require {{pll|Mounts|mounts}} to be installed. The size of the mounts needs to roughly match the size of the gadgets. A mount can be placed on any surface, and needs to be secured either by getting drilled in with an {{pll|Electric Hand Drill|electric hand drill}}, or by getting taped with a {{pll|Duct Tape|duct tape}}.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 22:25, 15 April 2025

ガジェットとは車両 に取り付け可能なアイテム です。設置することで、車両の機能と使いやすさを向上させることができます。Derail Valley中のショップ で購入できます。ガジェットの中には、車両システムを強化するものもあれば、装飾用 のものもあります。

ガジェットの設置には通常、多数のアイテムの使用が必要になるため、アイテム保管箱 道具小屋 、さらにはショップ の近くで作業することをお勧めします。

一部のガジェットの設置には取付台 が必要です。取付台のサイズはガジェットのサイズとほぼ一致している必要があります。取付台はあらゆる表面に設置できますが、電気ドリル で穴を開けてねじ固定するか、ダクトテープ で固定する必要があります。

Once the mount is in place and secured, a gadget can be attached to it. Gadgets and mounts can be removed using the hammer . Drilled holes can be repaired too, using the filler gun .

In order to function, some gadgets need to be connected to the vehicle’s electrical supply . This is done using the soldering gun loaded with soldering wire . Bear in mind that soldering wires are expendable, so and each connection costs money .

Some gadgets can be wired together, using the crimping tool . For example, pairing gadgets with controllers , such as buttons and knobs, makes it possible to toggle them on and off, or fine tune their intensity.

To help differentiate certain gadgets, there is a label maker .

Gadgets installed on DVRT vehicles will, upon vehicle’s despawning , return to a tool shed.