Translations:Automatic Lubricator/3/en: Difference between revisions

Revision as of 22:14, 11 March 2025

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Automatic Lubricator)

If the vehicle has been parked and the bearings have run dry, however, the lubricator must be manually primed by turning a crank on it, until the bearings are full, before the vehicle can be set in motion again.

If the vehicle has been parked and the bearings have run dry, it must be manually primed by turning the automatic lubricator's crank until full, before the vehicle is set in motion again.

Revision as of 15:36, 28 February 2025 view source FuzzyBot (talk \| contribs) translator 12,452 edits Importing a new version from external source		Revision as of 22:14, 11 March 2025 view source FuzzyBot (talk \| contribs) translator 12,452 edits Importing a new version from external source Newer edit →
Line 1:		Line 1:
	If the vehicle has been parked and ~~its bearings’ oil level is not full~~, it must be manually primed by turning the crank until full, before the vehicle is set in motion.		If the vehicle has been parked and the bearings have run dry, it must be manually primed by turning the automatic lubricator's crank until full, before the vehicle is set in motion again.