|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| <languages /> | | <languages /> |
| <div lang="en" dir="ltr" class="mw-content-ltr">
| | 部分{{pll|Rail Vehicle Types|車輛}}配有自動注油器，為部分必須{{pll|Lubrication Overview|潤滑}}的機構進行潤滑。其上有兩個視窗，左側顯示車輛儲有的滑油存量，右側顯示透過此設備潤滑的{{pll|Rail Vehicle Types|傳動系統}}軸承油位。 |
| Some {{pll|Rail Vehicle Types|vehicles}} that require {{pll|Lubrication Overview|lubrication}} come equipped with automatic lubricators. This is a small device housing two meters. The left meter shows the vehicle's oil storage level. The right meter shows oil level in the {{pll|Rail Vehicle Types|drivetrain}} bearings that this device lubricates.
| |
| </div>
| |
|
| |
|
| <div lang="en" dir="ltr" class="mw-content-ltr">
| | 當車輛移動時，軸承當中的滑油將被消耗。但自動注油器能取用儲有滑油為軸承進行潤滑。 |
| When the vehicle is in motion, oil in the bearings will be spent. However, the automatic lubricator automatically replenishes it from the onboard storage.
| |
| </div>
| |
|
| |
|
| <div lang="en" dir="ltr" class="mw-content-ltr">
| | 然而，若車輛停放了一段時間，並且軸承中的滑油已被耗盡，則必須透過轉動設備上的曲柄，手動為自動注油器注油，直到軸承油量完全補充，車輛才能再次駛動。 |
| If the vehicle has been parked and the bearings have run dry, however, the lubricator must be manually primed by turning a crank on it, until the bearings are full, before the vehicle can be set in motion again.
| |
| </div>
| |
| [[Category:Lubrication|2]] | | [[Category:Lubrication|2]] |
Latest revision as of 21:41, 23 April 2025
部分車輛 配有自動注油器，為部分必須潤滑 的機構進行潤滑。其上有兩個視窗，左側顯示車輛儲有的滑油存量，右側顯示透過此設備潤滑的傳動系統 軸承油位。
當車輛移動時，軸承當中的滑油將被消耗。但自動注油器能取用儲有滑油為軸承進行潤滑。
然而，若車輛停放了一段時間，並且軸承中的滑油已被耗盡，則必須透過轉動設備上的曲柄，手動為自動注油器注油，直到軸承油量完全補充，車輛才能再次駛動。
