Jump to content

Translations:Air Brake System Overview/4/en: Difference between revisions

From Derail Valley
VisualWikitext
FuzzyBot (talk | contribs)
translator
12,452 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
translator
12,452 edits
Importing a new version from external source
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
Brake pipe, pressurized by the main reservoir, is a system of valves, pipes and hoses stretched throughout a whole train. At every coupling, the airflow can be manually opened or closed, by a valve at its base, called the angle cock. This is done on the ends of the train, to prevent the pressurized air from escaping into the atmosphere. Under normal running conditions the brake pipe holds a pressure of 5 bar.
Brake pipe is a system of air lines designed to distribute compressed air throughout an entire train. On a properly coupled train, air line hoses are connected between individual vehicles with their valves open. At the ends of the train, however, the valves are closed. This allows the pipe to be pressurized at {{pll|Monitoring|5 bar}} in normal running conditions, throughout the train, by available main reservoirs. The volume of brake pipes is relatively low, but it grows bigger with each additional coupled vehicle.

Latest revision as of 16:38, 17 March 2025

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Air Brake System Overview)
Brake pipe is a system of air lines designed to distribute compressed air throughout an entire train. On a properly coupled train, air line hoses are connected between individual vehicles with their valves open. At the ends of the train, however, the valves are closed. This allows the pipe to be pressurized at {{pll|Monitoring|5 bar}} in normal running conditions, throughout the train, by available main reservoirs. The volume of brake pipes is relatively low, but it grows bigger with each additional coupled vehicle.

Brake pipe is a system of air lines designed to distribute compressed air throughout an entire train. On a properly coupled train, air line hoses are connected between individual vehicles with their valves open. At the ends of the train, however, the valves are closed. This allows the pipe to be pressurized at 5 bar in normal running conditions, throughout the train, by available main reservoirs. The volume of brake pipes is relatively low, but it grows bigger with each additional coupled vehicle.

Retrieved from "https://wiki.derailvalley.com/index.php?title=Translations:Air_Brake_System_Overview/4/en&oldid=29239"